How to use the automatic straightening machine

Automatic straightening machines are used to straighten metal bars, tubes, or wires that have become bent or deformed during the manufacturing process. These machines are equipped with rollers or dies that apply pressure to the metal as it passes through, forcing it back into a straight position.
Here is a step-by-step guide on how to use an automatic straightening machine:
1. Prepare the machine: Before using the automatic straightening machine, ensure that it is properly set up and in good working condition. Check for any loose or damaged parts, and make sure all safety features are in place and functioning correctly.
2. Adjust the rollers or dies: Depending on the type and size of the metal being straightened, you may need to adjust the position and pressure of the rollers or dies on the machine. This can usually be done using manual controls or a digital interface.
3. Load the metal: Carefully feed the bent or deformed metal into the straightening machine, making sure it is properly aligned with the rollers or dies. Be sure to follow any specific instructions or guidelines provided by the manufacturer.
4. Start the machine: Once the metal is loaded and properly positioned, start the automatic straightening machine. The metal will pass through the rollers or dies, which will apply pressure and force it back into a straight position.
5. Monitor the process: Keep a close eye on the metal as it passes through the machine, checking for any signs of resistance or irregularities. Make any necessary adjustments to the machine settings or the position of the metal to ensure a straight and smooth result.
6. Collect the straightened metal: As the metal emerges from the other side of the machine, carefully collect and inspect it to ensure it has been properly straightened. If needed, you can run the metal through the machine agai